Thesis Factibilidad técnico-económica de producción de acrilonitrilo verde mediante proceso directo
No Thumbnail Available
Date
2025-12
Journal Title
Journal ISSN
Volume Title
Program
Ingeniería Civil Química
Campus
Campus Santiago San Joaquín
Abstract
El acrilonitrilo (ACN) es un compuesto estratégico para la industria química, utilizado principalmente en la producción de fibras acrílicas, plásticos de ingeniería y cauchos sintéticos. Sin embargo, su fabricación tradicional mediante el proceso SOHIO, basado en la amoxidación de propileno con amoníaco y oxígeno, depende de materias primas fósiles y presenta un alto impacto ambiental asociado a emisiones de CO2, NOx y subproductos volátiles. Ante este escenario, la presente memoria tiene como objetivo evaluar la factibilidad técnico-económica de un proceso alternativo para la producción de acrilonitrilo verde, empleando hidrógeno verde y un proceso integrado que combina en una sola etapa la síntesis de amoníaco y su conversión simultánea a ACN. Para ello, se desarrollan simulaciones en Aspen Plus V14, modelando el proceso convencional SOHIO y el proceso directo propuesto mediante reactores tipo PFR, con modelos termodinámicos Peng-Robinson y cinéticas extraídas de la literatura para ambas reacciones (amoníaco y ACN). La evaluación económica se realiza en Aspen Process Economic Analyzer (APEA), considerando estimaciones de inversión (CAPEX), operación (OPEX) y costo nivelado de acrilonitrilo (LCOACN). Los resultados indican que el proceso SOHIO alcanza conversiones de propileno cercanas al 80%, selectividad de 52% hacia ACN y conversión de hidrógeno del 26% a 5 bar y 450°C para el proceso SOHIO y 385°C y 200 bar para el Haber-Bosch, mientras que el proceso bifuncional opera óptimamente a 400°C y 10 bar, logrando conversiones simultáneas de H2 y C3H6 del 74% y selectividad de 56% hacia ACN. El análisis de sensibilidad muestra que la desactivación parcial del catalizador de hierro no afecta significativamente el desempeño global, debido a (...).
Acrylonitrile (ACN) is a strategic compound for the chemical industry, mainly used in the production of acrylic fibers, engineering plastics, and synthetic rubbers. However, its traditional manufacture through the SOHIO process, based on the ammoxidation of propylene with ammonia and oxygen, depends on fossil feedstocks and exhibits a high environmental impact associated with emissions of CO2, NOx, and volatile by-products. In this context, the present thesis aims to assess the techno-economic feasibility of an alternative process for the production of green acrylonitrile, employing green hydrogen and an integrated route that combines, in a single step, ammonia synthesis and its simultaneous conversion to ACN. Simulations are developed in Aspen Plus V14, modelling both the conventional SOHIO process and the proposed direct process using plug-flow reactors (PFR), with Peng–Robinson thermodynamic models and kinetic data extracted from the literature for both reactions (ammonia and ACN). The economic assessment is carried out in Aspen Process Economic Analyzer (APEA), considering estimates of capital investment (CAPEX), operating costs (OPEX), and the levelized cost of acrylonitrile (LCOACN). The results indicate that the SOHIO process achieves propylene conversions close to 80%, 52% selectivity toward ACN, and 26% hydrogen conversion at 5 bar and 450°C for the SOHIO reactor and 385°C and 200 bar for the Haber–Bosch unit. In contrast, the bifunctional process operates optimally at 400°C and 10 bar, achieving simultaneous H2 and C3H6 conversions of 74% and 56% selectivity to ACN. Sensitivity analysis shows that partial deactivation of the iron catalyst does not significantly affect the overall performance, since the (...).
Acrylonitrile (ACN) is a strategic compound for the chemical industry, mainly used in the production of acrylic fibers, engineering plastics, and synthetic rubbers. However, its traditional manufacture through the SOHIO process, based on the ammoxidation of propylene with ammonia and oxygen, depends on fossil feedstocks and exhibits a high environmental impact associated with emissions of CO2, NOx, and volatile by-products. In this context, the present thesis aims to assess the techno-economic feasibility of an alternative process for the production of green acrylonitrile, employing green hydrogen and an integrated route that combines, in a single step, ammonia synthesis and its simultaneous conversion to ACN. Simulations are developed in Aspen Plus V14, modelling both the conventional SOHIO process and the proposed direct process using plug-flow reactors (PFR), with Peng–Robinson thermodynamic models and kinetic data extracted from the literature for both reactions (ammonia and ACN). The economic assessment is carried out in Aspen Process Economic Analyzer (APEA), considering estimates of capital investment (CAPEX), operating costs (OPEX), and the levelized cost of acrylonitrile (LCOACN). The results indicate that the SOHIO process achieves propylene conversions close to 80%, 52% selectivity toward ACN, and 26% hydrogen conversion at 5 bar and 450°C for the SOHIO reactor and 385°C and 200 bar for the Haber–Bosch unit. In contrast, the bifunctional process operates optimally at 400°C and 10 bar, achieving simultaneous H2 and C3H6 conversions of 74% and 56% selectivity to ACN. Sensitivity analysis shows that partial deactivation of the iron catalyst does not significantly affect the overall performance, since the (...).
Description
Keywords
Hidrógeno verde, Proceso SOHIO, Síntesis de amoníaco, Amoxidación, Procesos catalíticos, Simulación de procesos, Descarbonización, Transición energética
