Thesis REDISEÑO DEL BANCO DE ENSAYOS DE BOMBAS CENTRÍFUGAS DEL LABORATORIO DE TERMOFLUIDOS, CON MONITOREO EXTERNO DE VARIABLES
Date
2016
Authors
BLAAUBOER PINTO, ANDRÉS IGNACIO
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
En este trabajo de título se diseña un laboratorio de prueba de bombas centrifugas para ser implementado en dependencias del laboratorio de termofluidos del departamento de Ingeniería Mecánica de la Universidad Técnica Federico Santa María, Valparaíso, Chile.El laboratorio ha sido configurado para testear dos bombas, con capacidad para conectarse en serie, paralelo. La instalación cuenta con accesorios que permiten el rápido cambio de bomba a testear.Se analiza la base teórica y funcionamiento de las bombas, considerando las normas internacionales que regulan los bancos de ensayos de bombas hidráulicas. Para cumplir con la norma ISO 9906, se detallan las partes, componentes y geometrías críticas de este laboratorio y se incluyen planos para fabricar las piezas.Los sistemas de control y automatización facilitan la ejecución de las pruebas a las bombas. Se hace un estudio sobre los costos y capacidades de los sistemas de control tradicional, específicamente sistemas SCADA, y se propone un modelo de control basado en la placa Arduino, con sus limitaciones.
In this title work, a centrifugal water pump test laboratory is designed in order to be implemented in the thermofluids laboratory of the mechanical engineering departament of the Federico Santa María Technical University, Valparaiso, Chile.The laboratory has been set up to test pumps, with capacity to be connected in serial or parallel. Also has accessories that make faster the pump interchange.The theoretical basis and operation of the pumps is analyzed, considering international standards that regulate hydraulic pumps test banks. In order to comply with ISO 9906 standard; parts, components and critical geometries of this laboratory are detailed and drawings are included to manufacture the parts.The control and automation systems facilitate the execution of the pump's tests. A study about the cost and capabilities of the traditional control systems, specifically SCADA systems, and a control model is proposed, based on the Arduino Board, with its limitations.
In this title work, a centrifugal water pump test laboratory is designed in order to be implemented in the thermofluids laboratory of the mechanical engineering departament of the Federico Santa María Technical University, Valparaiso, Chile.The laboratory has been set up to test pumps, with capacity to be connected in serial or parallel. Also has accessories that make faster the pump interchange.The theoretical basis and operation of the pumps is analyzed, considering international standards that regulate hydraulic pumps test banks. In order to comply with ISO 9906 standard; parts, components and critical geometries of this laboratory are detailed and drawings are included to manufacture the parts.The control and automation systems facilitate the execution of the pump's tests. A study about the cost and capabilities of the traditional control systems, specifically SCADA systems, and a control model is proposed, based on the Arduino Board, with its limitations.
Description
Catalogado desde la version PDF de la tesis.
Keywords
BOMBA CENTRIFUGA , BOMBEO TRIFASICO , LABORATORIO DE TERMOFLUIDOS