Show simple item record

dc.contributor.advisorROTH KLIEM, MIRIAM
dc.contributor.authorBOLOVIC RIQUELME, KEVIN ALEXANDER
dc.contributor.otherBARRAZA VICENCIO, RODRIGO
dc.coverage.spatialCampus San Joaquín, Santiagoes_CL
dc.date.accessioned2020-04-27T19:48:35Z
dc.date.available2020-04-27T19:48:35Z
dc.date.issued2019-01
dc.identifier.urihttps://hdl.handle.net/11673/49004
dc.description.abstractEn este documento, se realiza una evaluación de las capacidades del banco de pruebas de bombas centrífugas montado en el laboratorio de termofluidos, perteneciente al departamento de Ingeniería Civil Mecánica de la Universidad Técnica Federico Santa María, campus San Joaquín, Santiago, Chile. El banco está constituido por dos bombas centrífugas, una válvula de estrangulación neumática, sensores de presión y caudal, además de un sistema electrónico formado por un PLC, 2 variadores de frecuencia y una pantalla HMI que permite la lectura de las variables, como también el control de la válvula neumática y de los variadores de frecuencia. Se analiza la competencia y capacidad de este banco para poder realizar una prueba de rendimiento hidráulico para las curvas características de altura y potencia. Se implementan las exigencias de la Norma ISO 9906-2012 en cuanto a condiciones de diseño, cumpliendo con los requerimientos del grado 1, que, según lo expuesto en la norma, es la categoría de mayor exigencia que permite asegurar condiciones de flujo estable.es_CL
dc.description.abstractIn this document, is carried out an evaluation of the capabilities of test rig of centrifugal pumps mounted in the thermofluid laboratory that belongs to the Mechanical Civil Engineering department of Universidad Técnica Federico Santa María, San Joaquin Campus, Santiago, Chile.The test rig is constituted by two centrifugal pumps, a pneumatic throttle valve, pressure and flow sensors and an electronic system formed by a PLC, two variable frequency drives and an HMI screen that allows the reading of the variables, as well as the control of the pneumatic valve and the variable frequency drives. The competence and capacity of this test rig is analyzed to be able to perform a hydraulic performance acceptance test for characteristic height and power curves. The requirements of ISO 9906-2012 are implemented in design conditions, fulfilling with the requirements of grade 1. This grade can allow to ensure stable flow conditions.es_CL
dc.format.extent173 h.es_CL
dc.subjectBOMBAS CENTRIFUGASes_CL
dc.subjectPLANIFICACION ESTRATEGICAes_CL
dc.subjectLABORATORIOS DE ENSAYOSes_CL
dc.subject.otherINGENIERIA CIVIL MECANICAes_CL
dc.titleEVALUACIÓN, EQUIPAMIENTO Y PUESTA EN MARCHA DEL BANCO DE ENSAYOS DE BOMBAS CENTRÍFUGAS DEL LABORATORIO DE TERMOFLUIDOS SEGÚN NORMA ISO 9906-2012es_CL
dc.typeTesis de Pregrado
dc.description.degreeINGENIERO CIVIL MECÁNICOes_CL
dc.contributor.departmentUniversidad Técnica Federico Santa María. Departamento de Ingeniería Mecánicaes_CL
dc.description.programUNIVERSIDAD TÉCNICA FEDERICO SANTA MARÍA UTFSM. DEPARTAMENTO DE INGENIERÍA MECÁNICA. INGENIERÍA CIVIL MECÁNICAes_CL
dc.identifier.barcode3560902038844es_CL


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record