Show simple item record

dc.contributor.authorDURÁN FLORES, ABEL ANDRÉS EDUARDO
dc.coverage.spatiales_CL
dc.date.accessioned2018-06-18T19:45:55Z
dc.date.available2018-06-18T19:45:55Z
dc.date.issued2018
dc.identifier.urihttp://hdl.handle.net/11673/40959
dc.descriptionCatalogado desde la version PDF de la tesis.es_CL
dc.description.abstractEl presente trabajo tiene por objetivo verificar estructuralmente un galpón industrial para el funcionamiento de dos puentes grúa de 5 y 10 toneladas de capacidad bajo las condiciones establecidas por la normativa atingente. Para esto, primero se determinaron las condiciones de operación y servicio para seleccionar entre los tipos de puentes grúa que existen en el mercado el más adecuado a los requerimientos de la empresa. Luego se identificaron las normativas que se aplican en el diseño del galpón para determinar las fuerzas y combinaciones de cargas que se deben tener en cuenta para la verificación estructural.Del análisis al modelo del galpón industrial realizado mediante el software Robot Structural Analysis Professional se obtuvo que hay componentes del galpón que no resisten las combinaciones de cargas, por lo cual se realizó un rediseño de estos hasta cumplir con los requerimientos y permitir la instalación de los puentes grúas.Adicionalmente se investigó el método de recertificación de puentes grúa para evaluar si es aplicable a todo tipo de instalaciones industriales y para establecer recomendaciones a la empresa cuando se requiera aplicar este método a los puentes grúa.es_CL
dc.description.abstractThe objective of this work is to verify the structure of an industrial shed with the established loads by the local regulation to install two overhead bridge cranes with a nominal capacity of 5 and 10 tons each. For this purpose, the first step was to identify and classify the cranes (on the current market) to select a suitable one according to the requirements of the Company. Then, the second step was to identify the regulations that applies on the shed design to establish the loads and its combinations to consider in the structural verification. Finally, the industrial shed design was perform using the Robot Structural Analysis Professional software where the loads and combinations of loads are evaluated in order to complete the structural verification of the shed.The analysis of the simulation allows to identify the shed components which are not able to resist the loads combinations. Therefore, a new design is proposed to achieve the requirements of the Company and to allow the cranes installation.In addition, the certification method for cranes was investigated to evaluate if it can be applied on any kind of industrials facilities and to establish recommendations for the Company when the use of this method is required.eng
dc.format.extent158 h.
dc.format.mediumCD ROM
dc.format.mimetypeapplication/pdf
dc.subjectCARGA SISMICAes_CL
dc.subjectCOMBINACIONES DE CARGAes_CL
dc.subjectGALPONes_CL
dc.subjectPUENTE GRUAes_CL
dc.subjectVERIFICACION ESTRUCTURALes_CL
dc.titleVERIFICACIÓN ESTRUCTURAL DE UN GALPÓN QUE SOPORTA UN PUENTE GRÚA BAJO CONDICIONES DE CARGAS OPERACIONALES, ACELERACIONES Y CARGAS SÍSMICASes_CL
dc.typeTesis Pregradoes_CL
dc.rights.accessRightsA - Internet abierta www.repositorio.usm.cl y otros repositorios a la que la USM se adscriba
dc.description.degreeINGENIERO CIVIL MECÁNICAes_CL
dc.contributor.departmentUniversidad Tecnica Federico Santa Maria UTFSM INGENIERÍA MECÁNICAes_CL
dc.description.programINGENIERÍA CIVIL MECÁNICA
dc.identifier.barcode3560902038534
usm.identifier.thesis4500014417
usm.date.thesisregistration2016


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record